You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

46 lines
2.5 KiB

Source: netcfg
Section: debian-installer
Priority: optional
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Uploaders: David Kimdon <dwhedon@debian.org>, Tollef Fog Heen <tfheen@debian.org>, Matt Kraai <kraai@debian.org>, Joey Hess <joeyh@debian.org>, Joshua Kwan <joshk@triplehelix.org>
Build-Depends: debhelper (>= 4.2.0), dpkg-dev (>= 1.9.0), libdebconfclient0-dev (>= 0.46), libdebian-installer4-dev, po-debconf (>= 0.5.0), libiw-dev
Standards-Version: 3.6.1.0
Package: netcfg
XC-Package-Type: udeb
Architecture: i386 sparc alpha m68k arm powerpc mips mipsel hppa ia64
Depends: ${shlibs:Depends}, cdebconf-udeb, dhcp3-client-udeb | dhcp-client-udeb | pump-udeb | busybox-cvs-udeb | busybox-cvs-net-udeb, ethernet-card-detection, libiw27-udeb
Provides: configured-network
XB-Installer-Menu-Item: 18
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Package: netcfg-dhcp
XC-Package-Type: udeb
Architecture: i386 sparc alpha m68k arm powerpc mips mipsel hppa ia64
Depends: ${shlibs:Depends}, cdebconf-udeb, dhcp-client-udeb | pump-udeb | busybox-cvs-udeb | busybox-cvs-net-udeb, ethernet-card-detection, libiw27-udeb
Provides: configured-network
XB-Installer-Menu-Item: 18
Description: Configure the network via DHCP
Many networks allow automatic configuration via DHCP (Dynamic Host
Configuration Protocol). If you are on a corporate network, a cable modem,
some DSL connections, or have any other sort of dynamic IP for Ethernet, you
will likely be able to configure via DHCP. If you have information such as IP
address, netmask, gateway, then DHCP is not appropriate. This package uses
the Internet Software Consortium's dhclient or Red Hat Linux's pump, whichever
is available.
Package: netcfg-static
XC-Package-Type: udeb
Architecture: any
Depends: ${shlibs:Depends}, cdebconf-udeb, ethernet-card-detection, libiw27-udeb
Provides: configured-network
XB-Installer-Menu-Item: 20
Description: Configure a static network
If you have information such as IP address, netmask, gateway, then you will be
able to configure a static network. If you don't know this information, you
should ask your system administrator, or look at configuration via DHCP.