You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

32 lines
1.4 KiB

Source: netcfg
Section: debian-installer
Priority: standard
Maintainer: Debian Install System Team <>
Uploaders: David Kimdon <>, Tollef Fog Heen <>
Build-Depends: debhelper (>= 4.1.13), dpkg-dev (>= 1.9.0), libcdebconf-dev, libdebian-installer3-dev, po-debconf (>= 0.5.0)
Standards-Version: 3.1.1
Package: netcfg-dhcp
Architecture: any
Depends: ${shlibs:Depends}, cdebconf-udeb, dhcp-client-udeb | pump-udeb
Provides: configured-network
XB-Installer-Menu-Item: 12
Description: Configure the network via DHCP
Many networks allow automatic configuration via DHCP (Dynamic Host
Configuration Protocol). If you are on a corporate network, a cable modem,
some DSL connections, or have any other sort of dynamic IP for Ethernet, you
will likely be able to configure via DHCP. If you have information such as IP
address, netmask, gateway, then DHCP is not appropriate. This package uses
the Internet Software Consortium's dhclient or Red Hat Linux's pump, whichever
is available.
Package: netcfg-static
Architecture: any
Depends: ${shlibs:Depends}, cdebconf-udeb
Provides: configured-network
XB-Installer-Menu-Item: 13
Description: Configure a static network
If you have information such as IP address, netmask, gateway, then you will be
able to configure a static network. If you don't know this information, you
should ask you system administrator, or look at configuration via DHCP.