You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ralph Rönnquist 999258bf0b editorial improvements 8 months ago
asm cleanup 8 months ago
debian version update 8 months ago
src remove noise and stripping 8 months ago
.gitignore ignore experimental subdirs 8 months ago
Makefile added man page for diskfile 8 months ago
README.adoc editorial 8 months ago
functions capture calling action 8 months ago
overlay-boot refactoring for more flexible config 8 months ago
overlay-boot.8.adoc editorial improvements 8 months ago
overlay-diskfile adding support for diskfiles 8 months ago
overlay-diskfile.8.adoc added examples 8 months ago
overlay-go use -i as well 8 months ago
overlay-go.8.adoc added individual man pages 8 months ago
overlay-init revised startup 8 months ago
overlay-postmount revised startup 8 months ago
overlay-premount revised startup 8 months ago
overlay-stop refactoring for more flexible config 8 months ago
overlay-stop.8.adoc added individual man pages 8 months ago

README.adoc

The overlay-boot Project

The overlay-boot project implements a "minimalist approach" for dividing a single host into "subhosts" for administratively separated services. The project provides core support for "subhosts" that are independent operating system environments but using overlay root filesystems, and with their services executed with separated namespaces by a common kernel.

The concept is similar to "containers" and "virtual machines", but with much lighter touch that is aimed at light-weight technical separation of service environments within a common adminstration framework.

  • overlay-boot implements a simple and efficient networking principle where networking is achived via network namspaces and virtual cabling. There is an overarching adminstrative control at the host end while the subhosts are adminstrated separately as if they were alone.

  • overlay-boot includes support for overlay root filesystem with persistent individual overlays for the subhosts. This is scripted to be open for any storage solutions, including the sharing of file system subtrees, disk and partition image files and logical volume set ups.

  • overlay-boot includes a scripted service oriented "subhost init" procedure that is open for all kinds of service management, including the trivial case of "no services" (as is necessary for installing and configuring the service or services of a subhost).

A usage example (minimal)

A subhost is techincally defined as a directory that contains three mount points "worK', "root" and "live", and a configuration file with at least a definition of the BASE variable with the pathname of the subhost directory. For convenience, the BASE pathname is understood as relative to its own directory, and thus, if the configuration resides in the subhost directory a simple "BASE=." assignment is a sufficient configuration.

Refer to the overlay-boot manpage for all the configuration options.

  1. The minimal overlay subhost setup

# mkdir /ex1 /ex1/work /ex1/root /ex1/live
# echo BASE=. > /ex1/ex1.conf

The minimal overlay subhost may then be started with

# overlay-boot /ex1/ex1.conf

and it may be stopped with:

# overlay-stop /ex1/ex1.conf

The subhost environment may be "entered" with

# overlay-go ex1

Another usage example (MTA)

This is an example setup at /opt/mta of a larger overlay subhost for an MTA as primary service and with some additional useful companion services.

Example 1. Initial setup for /opt/mta
$ sudo mkdir -p /opt/mta/{live,root,work}

# sudo tee /opt/mta/mta.conf <EOF
BASE=.
CABLES= =06:20:03:4e:a6:f2
START= hostname.sh rsyslog networking ssh saslauthd postfix dovecot
EOF

Note that this initial setup includes a MAC address for the subhost end of the (single) virtual cable, and an enumeration of (sysv) services to start "automatically" within the subhost. Of course those services might not be available on the first start, and then the initial admin task is to install them inside the subhost.

This example includes networking setup which is necessary for the subhost services. That setup includes both host end configurations and subhost end configurations.

Example 2. Initial networking setup (ifupdown, and e.g. MTANET=192.168.0)
# echo "source interfaces.d/mta.conf" >> /etc/network/interfaces
# echo "$MTANET.2 mta" >> /etc/hosts
# echo "mta" > /opt/mta/root/etc/hostname

# iptables -t nat -I PREROUTING -p tcp --dport 25 -j DNAT --to-destination $MTANET.2
# iptables -t nat -I POSTROUTING -s $MTANET.2 -j MASQUERADE

# cat > /etc/network/interfaces.d/mta.conf <EOF
iface mta0 inet static
    address $MTANET.1/24
EOF

# cat > /opt/mta/root/etc/network/interfaces <EOF
auto lo eth0
iface lo inet loopback
iface eth0 inet static
    address $MTANET.2/24
    gateway $MTANET.1
EOF
  • the host end cabling configuration is done in a separate file (/etc/network/interfaces.d/mta.conf) that is explicitly sourced in /etc/network/interfaces

  • the firewall rules direct incoming port 25 traffic onwards to the subhost, and provides NAT for its outbound traffic

  • host names are not necessarily used, but it may be convenient. The subhost has a separate UTS namespace and there might be an initial confusion about hostname.

  • the subhost cable end configuration is done directly into a "fresh" subhost root/etc/network/interfaces. Note that overlay-boot will itself prepare a minimal fresh root/etc/network/interfaces if there is none; that is done so as to avoid "accidental" use of the main host configuration in the subhost.

Example 3. Starting the subhost
# overlay-boot /opt/mta/mta.conf

The subhost will start ssh service which may allow user to enter the subhost via ssh. Since the subhost root filesystem is an overlay, it will in particular "inherit" the /home tree as well as most of /etc, and thus the main host user would be able to enter the subhost via ssh in the same way as they enter the main host via ssh.

It is also possible to enter with overlay-go mta for administrative purposes.

Example 4. Stopping the subhost
# overlay-stop /opt/mta/mta.conf