You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

904 lines
28 KiB

  1. # Makefile.in generated by automake 1.16.1 from Makefile.am.
  2. # @configure_input@
  3. # Copyright (C) 1994-2018 Free Software Foundation, Inc.
  4. # This Makefile.in is free software; the Free Software Foundation
  5. # gives unlimited permission to copy and/or distribute it,
  6. # with or without modifications, as long as this notice is preserved.
  7. # This program is distributed in the hope that it will be useful,
  8. # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  9. # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  10. # PARTICULAR PURPOSE.
  11. @SET_MAKE@
  12. VPATH = @srcdir@
  13. am__is_gnu_make = { \
  14. if test -z '$(MAKELEVEL)'; then \
  15. false; \
  16. elif test -n '$(MAKE_HOST)'; then \
  17. true; \
  18. elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  19. true; \
  20. else \
  21. false; \
  22. fi; \
  23. }
  24. am__make_running_with_option = \
  25. case $${target_option-} in \
  26. ?) ;; \
  27. *) echo "am__make_running_with_option: internal error: invalid" \
  28. "target option '$${target_option-}' specified" >&2; \
  29. exit 1;; \
  30. esac; \
  31. has_opt=no; \
  32. sane_makeflags=$$MAKEFLAGS; \
  33. if $(am__is_gnu_make); then \
  34. sane_makeflags=$$MFLAGS; \
  35. else \
  36. case $$MAKEFLAGS in \
  37. *\\[\ \ ]*) \
  38. bs=\\; \
  39. sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  40. | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
  41. esac; \
  42. fi; \
  43. skip_next=no; \
  44. strip_trailopt () \
  45. { \
  46. flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  47. }; \
  48. for flg in $$sane_makeflags; do \
  49. test $$skip_next = yes && { skip_next=no; continue; }; \
  50. case $$flg in \
  51. *=*|--*) continue;; \
  52. -*I) strip_trailopt 'I'; skip_next=yes;; \
  53. -*I?*) strip_trailopt 'I';; \
  54. -*O) strip_trailopt 'O'; skip_next=yes;; \
  55. -*O?*) strip_trailopt 'O';; \
  56. -*l) strip_trailopt 'l'; skip_next=yes;; \
  57. -*l?*) strip_trailopt 'l';; \
  58. -[dEDm]) skip_next=yes;; \
  59. -[JT]) skip_next=yes;; \
  60. esac; \
  61. case $$flg in \
  62. *$$target_option*) has_opt=yes; break;; \
  63. esac; \
  64. done; \
  65. test $$has_opt = yes
  66. am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  67. am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  68. pkgdatadir = $(datadir)/@PACKAGE@
  69. pkgincludedir = $(includedir)/@PACKAGE@
  70. pkglibdir = $(libdir)/@PACKAGE@
  71. pkglibexecdir = $(libexecdir)/@PACKAGE@
  72. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  73. install_sh_DATA = $(install_sh) -c -m 644
  74. install_sh_PROGRAM = $(install_sh) -c
  75. install_sh_SCRIPT = $(install_sh) -c
  76. INSTALL_HEADER = $(INSTALL_DATA)
  77. transform = $(program_transform_name)
  78. NORMAL_INSTALL = :
  79. PRE_INSTALL = :
  80. POST_INSTALL = :
  81. NORMAL_UNINSTALL = :
  82. PRE_UNINSTALL = :
  83. POST_UNINSTALL = :
  84. build_triplet = @build@
  85. host_triplet = @host@
  86. @BUILD_DOCUMENTATION_TRUE@am__append_1 = docs
  87. subdir = .
  88. ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  89. am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
  90. $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
  91. $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
  92. $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
  93. $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  94. $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  95. $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
  96. $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
  97. $(top_srcdir)/configure.ac
  98. am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  99. $(ACLOCAL_M4)
  100. DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
  101. $(am__configure_deps) $(am__DIST_COMMON)
  102. am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  103. configure.lineno config.status.lineno
  104. mkinstalldirs = $(install_sh) -d
  105. CONFIG_HEADER = config.h
  106. CONFIG_CLEAN_FILES =
  107. CONFIG_CLEAN_VPATH_FILES =
  108. AM_V_P = $(am__v_P_@AM_V@)
  109. am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  110. am__v_P_0 = false
  111. am__v_P_1 = :
  112. AM_V_GEN = $(am__v_GEN_@AM_V@)
  113. am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  114. am__v_GEN_0 = @echo " GEN " $@;
  115. am__v_GEN_1 =
  116. AM_V_at = $(am__v_at_@AM_V@)
  117. am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
  118. am__v_at_0 = @
  119. am__v_at_1 =
  120. SOURCES =
  121. DIST_SOURCES =
  122. RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
  123. ctags-recursive dvi-recursive html-recursive info-recursive \
  124. install-data-recursive install-dvi-recursive \
  125. install-exec-recursive install-html-recursive \
  126. install-info-recursive install-pdf-recursive \
  127. install-ps-recursive install-recursive installcheck-recursive \
  128. installdirs-recursive pdf-recursive ps-recursive \
  129. tags-recursive uninstall-recursive
  130. am__can_run_installinfo = \
  131. case $$AM_UPDATE_INFO_DIR in \
  132. n|no|NO) false;; \
  133. *) (install-info --version) >/dev/null 2>&1;; \
  134. esac
  135. RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  136. distclean-recursive maintainer-clean-recursive
  137. am__recursive_targets = \
  138. $(RECURSIVE_TARGETS) \
  139. $(RECURSIVE_CLEAN_TARGETS) \
  140. $(am__extra_recursive_targets)
  141. AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
  142. cscope distdir distdir-am dist dist-all distcheck
  143. am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
  144. $(LISP)config.h.in
  145. # Read a list of newline-separated strings from the standard input,
  146. # and print each of them once, without duplicates. Input order is
  147. # *not* preserved.
  148. am__uniquify_input = $(AWK) '\
  149. BEGIN { nonempty = 0; } \
  150. { items[$$0] = 1; nonempty = 1; } \
  151. END { if (nonempty) { for (i in items) print i; }; } \
  152. '
  153. # Make sure the list of sources is unique. This is necessary because,
  154. # e.g., the same source file might be shared among _SOURCES variables
  155. # for different programs/libraries.
  156. am__define_uniq_tagged_files = \
  157. list='$(am__tagged_files)'; \
  158. unique=`for i in $$list; do \
  159. if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  160. done | $(am__uniquify_input)`
  161. ETAGS = etags
  162. CTAGS = ctags
  163. CSCOPE = cscope
  164. DIST_SUBDIRS = src themes images scripts systemd-units po docs
  165. am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
  166. $(top_srcdir)/build-tools/compile \
  167. $(top_srcdir)/build-tools/config.guess \
  168. $(top_srcdir)/build-tools/config.rpath \
  169. $(top_srcdir)/build-tools/config.sub \
  170. $(top_srcdir)/build-tools/install-sh \
  171. $(top_srcdir)/build-tools/ltmain.sh \
  172. $(top_srcdir)/build-tools/missing ABOUT-NLS AUTHORS COPYING \
  173. ChangeLog INSTALL NEWS README TODO build-tools/compile \
  174. build-tools/config.guess build-tools/config.rpath \
  175. build-tools/config.sub build-tools/depcomp \
  176. build-tools/install-sh build-tools/ltmain.sh \
  177. build-tools/missing
  178. DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  179. distdir = $(PACKAGE)-$(VERSION)
  180. top_distdir = $(distdir)
  181. am__remove_distdir = \
  182. if test -d "$(distdir)"; then \
  183. find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
  184. && rm -rf "$(distdir)" \
  185. || { sleep 5 && rm -rf "$(distdir)"; }; \
  186. else :; fi
  187. am__post_remove_distdir = $(am__remove_distdir)
  188. am__relativize = \
  189. dir0=`pwd`; \
  190. sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  191. sed_rest='s,^[^/]*/*,,'; \
  192. sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  193. sed_butlast='s,/*[^/]*$$,,'; \
  194. while test -n "$$dir1"; do \
  195. first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  196. if test "$$first" != "."; then \
  197. if test "$$first" = ".."; then \
  198. dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  199. dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
  200. else \
  201. first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
  202. if test "$$first2" = "$$first"; then \
  203. dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
  204. else \
  205. dir2="../$$dir2"; \
  206. fi; \
  207. dir0="$$dir0"/"$$first"; \
  208. fi; \
  209. fi; \
  210. dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  211. done; \
  212. reldir="$$dir2"
  213. GZIP_ENV = --best
  214. DIST_ARCHIVES = $(distdir).tar.xz
  215. DIST_TARGETS = dist-xz
  216. distuninstallcheck_listfiles = find . -type f -print
  217. am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  218. | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
  219. distcleancheck_listfiles = find . -type f -print
  220. ACLOCAL = @ACLOCAL@
  221. AMTAR = @AMTAR@
  222. AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
  223. AR = @AR@
  224. AUTOCONF = @AUTOCONF@
  225. AUTOHEADER = @AUTOHEADER@
  226. AUTOMAKE = @AUTOMAKE@
  227. AWK = @AWK@
  228. CC = @CC@
  229. CCDEPMODE = @CCDEPMODE@
  230. CFLAGS = @CFLAGS@
  231. CPP = @CPP@
  232. CPPFLAGS = @CPPFLAGS@
  233. CURSES_LIBS = @CURSES_LIBS@
  234. CYGPATH_W = @CYGPATH_W@
  235. DBUS_CFLAGS = @DBUS_CFLAGS@
  236. DBUS_LIBS = @DBUS_LIBS@
  237. DEFS = @DEFS@
  238. DEPDIR = @DEPDIR@
  239. DLLTOOL = @DLLTOOL@
  240. DRM_CFLAGS = @DRM_CFLAGS@
  241. DRM_LIBS = @DRM_LIBS@
  242. DSYMUTIL = @DSYMUTIL@
  243. DUMPBIN = @DUMPBIN@
  244. ECHO_C = @ECHO_C@
  245. ECHO_N = @ECHO_N@
  246. ECHO_T = @ECHO_T@
  247. EGREP = @EGREP@
  248. EXEEXT = @EXEEXT@
  249. FGREP = @FGREP@
  250. GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
  251. GMSGFMT = @GMSGFMT@
  252. GMSGFMT_015 = @GMSGFMT_015@
  253. GREP = @GREP@
  254. GTK_CFLAGS = @GTK_CFLAGS@
  255. GTK_LIBS = @GTK_LIBS@
  256. IMAGE_CFLAGS = @IMAGE_CFLAGS@
  257. IMAGE_LIBS = @IMAGE_LIBS@
  258. INSTALL = @INSTALL@
  259. INSTALL_DATA = @INSTALL_DATA@
  260. INSTALL_PROGRAM = @INSTALL_PROGRAM@
  261. INSTALL_SCRIPT = @INSTALL_SCRIPT@
  262. INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  263. INTLLIBS = @INTLLIBS@
  264. INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
  265. LD = @LD@
  266. LDFLAGS = @LDFLAGS@
  267. LIBICONV = @LIBICONV@
  268. LIBINTL = @LIBINTL@
  269. LIBOBJS = @LIBOBJS@
  270. LIBS = @LIBS@
  271. LIBTOOL = @LIBTOOL@
  272. LIPO = @LIPO@
  273. LN_S = @LN_S@
  274. LTLIBICONV = @LTLIBICONV@
  275. LTLIBINTL = @LTLIBINTL@
  276. LTLIBOBJS = @LTLIBOBJS@
  277. LT_AGE = @LT_AGE@
  278. LT_CURRENT = @LT_CURRENT@
  279. LT_REVISION = @LT_REVISION@
  280. LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
  281. MAINT = @MAINT@
  282. MAKEINFO = @MAKEINFO@
  283. MANIFEST_TOOL = @MANIFEST_TOOL@
  284. MKDIR_P = @MKDIR_P@
  285. MSGFMT = @MSGFMT@
  286. MSGFMT_015 = @MSGFMT_015@
  287. MSGMERGE = @MSGMERGE@
  288. NM = @NM@
  289. NMEDIT = @NMEDIT@
  290. OBJDUMP = @OBJDUMP@
  291. OBJEXT = @OBJEXT@
  292. OTOOL = @OTOOL@
  293. OTOOL64 = @OTOOL64@
  294. PACKAGE = @PACKAGE@
  295. PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  296. PACKAGE_NAME = @PACKAGE_NAME@
  297. PACKAGE_STRING = @PACKAGE_STRING@
  298. PACKAGE_TARNAME = @PACKAGE_TARNAME@
  299. PACKAGE_URL = @PACKAGE_URL@
  300. PACKAGE_VERSION = @PACKAGE_VERSION@
  301. PANGO_CFLAGS = @PANGO_CFLAGS@
  302. PANGO_LIBS = @PANGO_LIBS@
  303. PATH_SEPARATOR = @PATH_SEPARATOR@
  304. PKG_CONFIG = @PKG_CONFIG@
  305. PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
  306. PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
  307. PLYMOUTH_CFLAGS = @PLYMOUTH_CFLAGS@
  308. PLYMOUTH_CLIENT_DIR = @PLYMOUTH_CLIENT_DIR@
  309. PLYMOUTH_CONF_DIR = @PLYMOUTH_CONF_DIR@
  310. PLYMOUTH_DAEMON_DIR = @PLYMOUTH_DAEMON_DIR@
  311. PLYMOUTH_DATADIR = @PLYMOUTH_DATADIR@
  312. PLYMOUTH_LIBDIR = @PLYMOUTH_LIBDIR@
  313. PLYMOUTH_LIBEXECDIR = @PLYMOUTH_LIBEXECDIR@
  314. PLYMOUTH_LIBS = @PLYMOUTH_LIBS@
  315. PLYMOUTH_LOGO_FILE = @PLYMOUTH_LOGO_FILE@
  316. PLYMOUTH_PLUGIN_PATH = @PLYMOUTH_PLUGIN_PATH@
  317. PLYMOUTH_POLICY_DIR = @PLYMOUTH_POLICY_DIR@
  318. PLYMOUTH_RUNTIME_DIR = @PLYMOUTH_RUNTIME_DIR@
  319. PLYMOUTH_RUNTIME_THEME_PATH = @PLYMOUTH_RUNTIME_THEME_PATH@
  320. PLYMOUTH_THEME_PATH = @PLYMOUTH_THEME_PATH@
  321. POSUB = @POSUB@
  322. RANLIB = @RANLIB@
  323. RELEASE_FILE = @RELEASE_FILE@
  324. SED = @SED@
  325. SET_MAKE = @SET_MAKE@
  326. SHELL = @SHELL@
  327. STRIP = @STRIP@
  328. SYSTEMD_ASK_PASSWORD_AGENT = @SYSTEMD_ASK_PASSWORD_AGENT@
  329. SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@
  330. UDEVADM = @UDEVADM@
  331. UDEV_CFLAGS = @UDEV_CFLAGS@
  332. UDEV_LIBS = @UDEV_LIBS@
  333. USE_NLS = @USE_NLS@
  334. VERSION = @VERSION@
  335. XGETTEXT = @XGETTEXT@
  336. XGETTEXT_015 = @XGETTEXT_015@
  337. XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
  338. XSLTPROC = @XSLTPROC@
  339. abs_builddir = @abs_builddir@
  340. abs_srcdir = @abs_srcdir@
  341. abs_top_builddir = @abs_top_builddir@
  342. abs_top_srcdir = @abs_top_srcdir@
  343. ac_ct_AR = @ac_ct_AR@
  344. ac_ct_CC = @ac_ct_CC@
  345. ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
  346. am__include = @am__include@
  347. am__leading_dot = @am__leading_dot@
  348. am__quote = @am__quote@
  349. am__tar = @am__tar@
  350. am__untar = @am__untar@
  351. background_color = @background_color@
  352. background_end_color = @background_end_color@
  353. background_start_color = @background_start_color@
  354. bindir = @bindir@
  355. build = @build@
  356. build_alias = @build_alias@
  357. build_cpu = @build_cpu@
  358. build_os = @build_os@
  359. build_vendor = @build_vendor@
  360. builddir = @builddir@
  361. datadir = @datadir@
  362. datarootdir = @datarootdir@
  363. docdir = @docdir@
  364. dvidir = @dvidir@
  365. exec_prefix = @exec_prefix@
  366. host = @host@
  367. host_alias = @host_alias@
  368. host_cpu = @host_cpu@
  369. host_os = @host_os@
  370. host_vendor = @host_vendor@
  371. htmldir = @htmldir@
  372. includedir = @includedir@
  373. infodir = @infodir@
  374. install_sh = @install_sh@
  375. libdir = @libdir@
  376. libexecdir = @libexecdir@
  377. localedir = @localedir@
  378. localstatedir = @localstatedir@
  379. logofile = @logofile@
  380. mandir = @mandir@
  381. mkdir_p = @mkdir_p@
  382. oldincludedir = @oldincludedir@
  383. pdfdir = @pdfdir@
  384. plymouthclientdir = @plymouthclientdir@
  385. plymouthdaemondir = @plymouthdaemondir@
  386. plymouthruntimedir = @plymouthruntimedir@
  387. prefix = @prefix@
  388. program_transform_name = @program_transform_name@
  389. psdir = @psdir@
  390. sbindir = @sbindir@
  391. sharedstatedir = @sharedstatedir@
  392. srcdir = @srcdir@
  393. sysconfdir = @sysconfdir@
  394. target_alias = @target_alias@
  395. top_build_prefix = @top_build_prefix@
  396. top_builddir = @top_builddir@
  397. top_srcdir = @top_srcdir@
  398. SUBDIRS = src themes images scripts systemd-units po $(am__append_1)
  399. DISTCHECK_CONFIGURE_FLAGS = --disable-tests --disable-systemd-integration
  400. EXTRA_DIST = build-tools/config.rpath ChangeLog \
  401. README
  402. MAINTAINERCLEANFILES = aclocal.m4 \
  403. config.h.in \
  404. config.h.in~ \
  405. config.sub \
  406. configure \
  407. Makefile.in
  408. ACLOCAL_AMFLAGS = -I m4
  409. all: config.h
  410. $(MAKE) $(AM_MAKEFLAGS) all-recursive
  411. .SUFFIXES:
  412. am--refresh: Makefile
  413. @:
  414. $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
  415. @for dep in $?; do \
  416. case '$(am__configure_deps)' in \
  417. *$$dep*) \
  418. echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
  419. $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
  420. && exit 0; \
  421. exit 1;; \
  422. esac; \
  423. done; \
  424. echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
  425. $(am__cd) $(top_srcdir) && \
  426. $(AUTOMAKE) --gnu Makefile
  427. Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  428. @case '$?' in \
  429. *config.status*) \
  430. echo ' $(SHELL) ./config.status'; \
  431. $(SHELL) ./config.status;; \
  432. *) \
  433. echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
  434. cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
  435. esac;
  436. $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  437. $(SHELL) ./config.status --recheck
  438. $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
  439. $(am__cd) $(srcdir) && $(AUTOCONF)
  440. $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
  441. $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  442. $(am__aclocal_m4_deps):
  443. config.h: stamp-h1
  444. @test -f $@ || rm -f stamp-h1
  445. @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
  446. stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
  447. @rm -f stamp-h1
  448. cd $(top_builddir) && $(SHELL) ./config.status config.h
  449. $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
  450. ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
  451. rm -f stamp-h1
  452. touch $@
  453. distclean-hdr:
  454. -rm -f config.h stamp-h1
  455. mostlyclean-libtool:
  456. -rm -f *.lo
  457. clean-libtool:
  458. -rm -rf .libs _libs
  459. distclean-libtool:
  460. -rm -f libtool config.lt
  461. # This directory's subdirectories are mostly independent; you can cd
  462. # into them and run 'make' without going through this Makefile.
  463. # To change the values of 'make' variables: instead of editing Makefiles,
  464. # (1) if the variable is set in 'config.status', edit 'config.status'
  465. # (which will cause the Makefiles to be regenerated when you run 'make');
  466. # (2) otherwise, pass the desired values on the 'make' command line.
  467. $(am__recursive_targets):
  468. @fail=; \
  469. if $(am__make_keepgoing); then \
  470. failcom='fail=yes'; \
  471. else \
  472. failcom='exit 1'; \
  473. fi; \
  474. dot_seen=no; \
  475. target=`echo $@ | sed s/-recursive//`; \
  476. case "$@" in \
  477. distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  478. *) list='$(SUBDIRS)' ;; \
  479. esac; \
  480. for subdir in $$list; do \
  481. echo "Making $$target in $$subdir"; \
  482. if test "$$subdir" = "."; then \
  483. dot_seen=yes; \
  484. local_target="$$target-am"; \
  485. else \
  486. local_target="$$target"; \
  487. fi; \
  488. ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  489. || eval $$failcom; \
  490. done; \
  491. if test "$$dot_seen" = "no"; then \
  492. $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  493. fi; test -z "$$fail"
  494. ID: $(am__tagged_files)
  495. $(am__define_uniq_tagged_files); mkid -fID $$unique
  496. tags: tags-recursive
  497. TAGS: tags
  498. tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  499. set x; \
  500. here=`pwd`; \
  501. if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  502. include_option=--etags-include; \
  503. empty_fix=.; \
  504. else \
  505. include_option=--include; \
  506. empty_fix=; \
  507. fi; \
  508. list='$(SUBDIRS)'; for subdir in $$list; do \
  509. if test "$$subdir" = .; then :; else \
  510. test ! -f $$subdir/TAGS || \
  511. set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  512. fi; \
  513. done; \
  514. $(am__define_uniq_tagged_files); \
  515. shift; \
  516. if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  517. test -n "$$unique" || unique=$$empty_fix; \
  518. if test $$# -gt 0; then \
  519. $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  520. "$$@" $$unique; \
  521. else \
  522. $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  523. $$unique; \
  524. fi; \
  525. fi
  526. ctags: ctags-recursive
  527. CTAGS: ctags
  528. ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  529. $(am__define_uniq_tagged_files); \
  530. test -z "$(CTAGS_ARGS)$$unique" \
  531. || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  532. $$unique
  533. GTAGS:
  534. here=`$(am__cd) $(top_builddir) && pwd` \
  535. && $(am__cd) $(top_srcdir) \
  536. && gtags -i $(GTAGS_ARGS) "$$here"
  537. cscope: cscope.files
  538. test ! -s cscope.files \
  539. || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
  540. clean-cscope:
  541. -rm -f cscope.files
  542. cscope.files: clean-cscope cscopelist
  543. cscopelist: cscopelist-recursive
  544. cscopelist-am: $(am__tagged_files)
  545. list='$(am__tagged_files)'; \
  546. case "$(srcdir)" in \
  547. [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
  548. *) sdir=$(subdir)/$(srcdir) ;; \
  549. esac; \
  550. for i in $$list; do \
  551. if test -f "$$i"; then \
  552. echo "$(subdir)/$$i"; \
  553. else \
  554. echo "$$sdir/$$i"; \
  555. fi; \
  556. done >> $(top_builddir)/cscope.files
  557. distclean-tags:
  558. -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  559. -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
  560. distdir: $(BUILT_SOURCES)
  561. $(MAKE) $(AM_MAKEFLAGS) distdir-am
  562. distdir-am: $(DISTFILES)
  563. $(am__remove_distdir)
  564. test -d "$(distdir)" || mkdir "$(distdir)"
  565. @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  566. topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  567. list='$(DISTFILES)'; \
  568. dist_files=`for file in $$list; do echo $$file; done | \
  569. sed -e "s|^$$srcdirstrip/||;t" \
  570. -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  571. case $$dist_files in \
  572. */*) $(MKDIR_P) `echo "$$dist_files" | \
  573. sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  574. sort -u` ;; \
  575. esac; \
  576. for file in $$dist_files; do \
  577. if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  578. if test -d $$d/$$file; then \
  579. dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  580. if test -d "$(distdir)/$$file"; then \
  581. find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  582. fi; \
  583. if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  584. cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  585. find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  586. fi; \
  587. cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  588. else \
  589. test -f "$(distdir)/$$file" \
  590. || cp -p $$d/$$file "$(distdir)/$$file" \
  591. || exit 1; \
  592. fi; \
  593. done
  594. @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  595. if test "$$subdir" = .; then :; else \
  596. $(am__make_dryrun) \
  597. || test -d "$(distdir)/$$subdir" \
  598. || $(MKDIR_P) "$(distdir)/$$subdir" \
  599. || exit 1; \
  600. dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  601. $(am__relativize); \
  602. new_distdir=$$reldir; \
  603. dir1=$$subdir; dir2="$(top_distdir)"; \
  604. $(am__relativize); \
  605. new_top_distdir=$$reldir; \
  606. echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  607. echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  608. ($(am__cd) $$subdir && \
  609. $(MAKE) $(AM_MAKEFLAGS) \
  610. top_distdir="$$new_top_distdir" \
  611. distdir="$$new_distdir" \
  612. am__remove_distdir=: \
  613. am__skip_length_check=: \
  614. am__skip_mode_fix=: \
  615. distdir) \
  616. || exit 1; \
  617. fi; \
  618. done
  619. -test -n "$(am__skip_mode_fix)" \
  620. || find "$(distdir)" -type d ! -perm -755 \
  621. -exec chmod u+rwx,go+rx {} \; -o \
  622. ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  623. ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  624. ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
  625. || chmod -R a+r "$(distdir)"
  626. dist-gzip: distdir
  627. tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
  628. $(am__post_remove_distdir)
  629. dist-bzip2: distdir
  630. tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
  631. $(am__post_remove_distdir)
  632. dist-lzip: distdir
  633. tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
  634. $(am__post_remove_distdir)
  635. dist-xz: distdir
  636. tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
  637. $(am__post_remove_distdir)
  638. dist-tarZ: distdir
  639. @echo WARNING: "Support for distribution archives compressed with" \
  640. "legacy program 'compress' is deprecated." >&2
  641. @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  642. tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
  643. $(am__post_remove_distdir)
  644. dist-shar: distdir
  645. @echo WARNING: "Support for shar distribution archives is" \
  646. "deprecated." >&2
  647. @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  648. shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
  649. $(am__post_remove_distdir)
  650. dist-zip: distdir
  651. -rm -f $(distdir).zip
  652. zip -rq $(distdir).zip $(distdir)
  653. $(am__post_remove_distdir)
  654. dist dist-all:
  655. $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
  656. $(am__post_remove_distdir)
  657. # This target untars the dist file and tries a VPATH configuration. Then
  658. # it guarantees that the distribution is self-contained by making another
  659. # tarfile.
  660. distcheck: dist
  661. case '$(DIST_ARCHIVES)' in \
  662. *.tar.gz*) \
  663. eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
  664. *.tar.bz2*) \
  665. bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
  666. *.tar.lz*) \
  667. lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
  668. *.tar.xz*) \
  669. xz -dc $(distdir).tar.xz | $(am__untar) ;;\
  670. *.tar.Z*) \
  671. uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
  672. *.shar.gz*) \
  673. eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
  674. *.zip*) \
  675. unzip $(distdir).zip ;;\
  676. esac
  677. chmod -R a-w $(distdir)
  678. chmod u+w $(distdir)
  679. mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
  680. chmod a-w $(distdir)
  681. test -d $(distdir)/_build || exit 0; \
  682. dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  683. && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  684. && am__cwd=`pwd` \
  685. && $(am__cd) $(distdir)/_build/sub \
  686. && ../../configure \
  687. $(AM_DISTCHECK_CONFIGURE_FLAGS) \
  688. $(DISTCHECK_CONFIGURE_FLAGS) \
  689. --srcdir=../.. --prefix="$$dc_install_base" \
  690. && $(MAKE) $(AM_MAKEFLAGS) \
  691. && $(MAKE) $(AM_MAKEFLAGS) dvi \
  692. && $(MAKE) $(AM_MAKEFLAGS) check \
  693. && $(MAKE) $(AM_MAKEFLAGS) install \
  694. && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  695. && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  696. && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
  697. distuninstallcheck \
  698. && chmod -R a-w "$$dc_install_base" \
  699. && ({ \
  700. (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
  701. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
  702. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
  703. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
  704. distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
  705. } || { rm -rf "$$dc_destdir"; exit 1; }) \
  706. && rm -rf "$$dc_destdir" \
  707. && $(MAKE) $(AM_MAKEFLAGS) dist \
  708. && rm -rf $(DIST_ARCHIVES) \
  709. && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  710. && cd "$$am__cwd" \
  711. || exit 1
  712. $(am__post_remove_distdir)
  713. @(echo "$(distdir) archives ready for distribution: "; \
  714. list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  715. sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
  716. distuninstallcheck:
  717. @test -n '$(distuninstallcheck_dir)' || { \
  718. echo 'ERROR: trying to run $@ with an empty' \
  719. '$$(distuninstallcheck_dir)' >&2; \
  720. exit 1; \
  721. }; \
  722. $(am__cd) '$(distuninstallcheck_dir)' || { \
  723. echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  724. exit 1; \
  725. }; \
  726. test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
  727. || { echo "ERROR: files left after uninstall:" ; \
  728. if test -n "$(DESTDIR)"; then \
  729. echo " (check DESTDIR support)"; \
  730. fi ; \
  731. $(distuninstallcheck_listfiles) ; \
  732. exit 1; } >&2
  733. distcleancheck: distclean
  734. @if test '$(srcdir)' = . ; then \
  735. echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  736. exit 1 ; \
  737. fi
  738. @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  739. || { echo "ERROR: files left in build directory after distclean:" ; \
  740. $(distcleancheck_listfiles) ; \
  741. exit 1; } >&2
  742. check-am: all-am
  743. check: check-recursive
  744. all-am: Makefile config.h
  745. installdirs: installdirs-recursive
  746. installdirs-am:
  747. install: install-recursive
  748. install-exec: install-exec-recursive
  749. install-data: install-data-recursive
  750. uninstall: uninstall-recursive
  751. install-am: all-am
  752. @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  753. installcheck: installcheck-recursive
  754. install-strip:
  755. if test -z '$(STRIP)'; then \
  756. $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  757. install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  758. install; \
  759. else \
  760. $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  761. install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  762. "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  763. fi
  764. mostlyclean-generic:
  765. clean-generic:
  766. distclean-generic:
  767. -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
  768. -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
  769. maintainer-clean-generic:
  770. @echo "This command is intended for maintainers to use"
  771. @echo "it deletes files that may require special tools to rebuild."
  772. -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
  773. clean: clean-recursive
  774. clean-am: clean-generic clean-libtool mostlyclean-am
  775. distclean: distclean-recursive
  776. -rm -f $(am__CONFIG_DISTCLEAN_FILES)
  777. -rm -f Makefile
  778. distclean-am: clean-am distclean-generic distclean-hdr \
  779. distclean-libtool distclean-tags
  780. dvi: dvi-recursive
  781. dvi-am:
  782. html: html-recursive
  783. html-am:
  784. info: info-recursive
  785. info-am:
  786. install-data-am:
  787. install-dvi: install-dvi-recursive
  788. install-dvi-am:
  789. install-exec-am:
  790. install-html: install-html-recursive
  791. install-html-am:
  792. install-info: install-info-recursive
  793. install-info-am:
  794. install-man:
  795. install-pdf: install-pdf-recursive
  796. install-pdf-am:
  797. install-ps: install-ps-recursive
  798. install-ps-am:
  799. installcheck-am:
  800. maintainer-clean: maintainer-clean-recursive
  801. -rm -f $(am__CONFIG_DISTCLEAN_FILES)
  802. -rm -rf $(top_srcdir)/autom4te.cache
  803. -rm -f Makefile
  804. maintainer-clean-am: distclean-am maintainer-clean-generic
  805. mostlyclean: mostlyclean-recursive
  806. mostlyclean-am: mostlyclean-generic mostlyclean-libtool
  807. pdf: pdf-recursive
  808. pdf-am:
  809. ps: ps-recursive
  810. ps-am:
  811. uninstall-am:
  812. .MAKE: $(am__recursive_targets) all install-am install-strip
  813. .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
  814. am--refresh check check-am clean clean-cscope clean-generic \
  815. clean-libtool cscope cscopelist-am ctags ctags-am dist \
  816. dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
  817. dist-xz dist-zip distcheck distclean distclean-generic \
  818. distclean-hdr distclean-libtool distclean-tags distcleancheck \
  819. distdir distuninstallcheck dvi dvi-am html html-am info \
  820. info-am install install-am install-data install-data-am \
  821. install-dvi install-dvi-am install-exec install-exec-am \
  822. install-html install-html-am install-info install-info-am \
  823. install-man install-pdf install-pdf-am install-ps \
  824. install-ps-am install-strip installcheck installcheck-am \
  825. installdirs installdirs-am maintainer-clean \
  826. maintainer-clean-generic mostlyclean mostlyclean-generic \
  827. mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
  828. uninstall-am
  829. .PRECIOUS: Makefile
  830. # Tell versions [3.59,3.63) of GNU make to not export all variables.
  831. # Otherwise a system limit (for SysV at least) may be exceeded.
  832. .NOEXPORT: